논문 상세보기

한국의류학회> 한국의류학회지> 육군 착용형 로봇을 장착하기 위한 기능성 의복 설계 요소 조사

KCI등재SCOUPUS

육군 착용형 로봇을 장착하기 위한 기능성 의복 설계 요소 조사

Survey on the Functional Clothing Design Factors for the Military Wearable Robot

엄란이 ( Rani Eom ) , 이예진 ( Yejin Lee )
  • : 한국의류학회
  • : 한국의류학회지 45권6호
  • : 연속간행물
  • : 2021년 12월
  • : 1004-1016(13pages)
한국의류학회지

DOI

10.5850/JKSCT.2021.45.6.1004


목차

Ⅰ. 서 론
Ⅱ. 연구방법
Ⅲ. 연구결과
Ⅳ. 결 론
References

키워드 보기


초록 보기

This study aims to derive the design requirements for functional clothing worn with military wearable robots using a survey of people with military experience. Specifically, 982 adult males with military and muscular exercise experience were surveyed for their demands for the clothing worn with wearable robots during military activities. The study showed that it is necessary to develop functional clothing worn inside robots suitable for frequent movements of soldiers to improve their comfort level of wearable robots. The surveyed soldiers indicated that they preferred the top and bottom clothing with high-pressure levels because the upper body felt fatigued during transportation, while both the upper and lower body got exhausted during marches. The survey of design requirements revealed that the participants preferred a top with long sleeves and a bottom with ankle-length leggings in color similar to current military uniforms. We conclude that it is important to design functional clothing worn inside wearable robots in different forms depending on frequent movements, e.g., with differentiated pressures and material placements.

UCI(KEPA)

I410-ECN-0102-2022-500-000931683

간행물정보

  • : 자연과학분야  > 가정
  • : KCI등재
  • : SCOPUS
  • : 격월
  • : 1225-1151
  • : 2234-0793
  • : 학술지
  • : 연속간행물
  • : 1977-2022
  • : 3792


저작권 안내

한국학술정보㈜의 모든 학술 자료는 각 학회 및 기관과 저작권 계약을 통해 제공하고 있습니다.

이에 본 자료를 상업적 이용, 무단 배포 등 불법적으로 이용할 시에는 저작권법 및 관계법령에 따른 책임을 질 수 있습니다.

46권2호(2022년 04월) 수록논문
최근 권호 논문
| | | |

KCI등재 SCOPUS

1고령자를 위한 허리 보호대 디자인 개발 -선호도 및 만족도 평가를 중심으로-

저자 : 박수진 ( Sujin Park ) , 박교리 ( Jiaoli Piao ) , 한여 ( Ru Han ) , 구수민 ( Sumin Koo )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 46권 2호 발행 연도 : 2022 페이지 : pp. 199-218 (20 pages)

다운로드

(기관인증 필요)

초록보기

Considering increasing demand for improved waist protectors for the elderly, in this study we sought to design a waist protector that reflects the body characteristics, preferences, and satisfactions of the elderly. A survey conducted to investigate elderly satisfaction with existing waist protectors, as well as their preferences in product function, design, and characteristics, found that consumers are not satisfied with current waist protector offerings and would prefer protectors that allow greater freedom to perform physical activities and that are more easily accessible. Based on the survey, we developed a guideline on function, design, and characteristics, resulting in four new waist protector designs: A and B for men, and C and D for women. Significant preference differences according to gender were reflected in the designs. For example, designs for female waist protectors focused much more on improving tightness, size, freedom of movement, and easy attachment or detachment than designs for male waist protectors did. Evaluation of satisfaction with new designs suggests that new designs meet the satisfaction criteria of elderly consumers, who express willingness to purchase and use them.

KCI등재 SCOPUS

2노년 여성의 요실금 및 요실금 제품에 대한 인식유형

저자 : 차수정 ( Su Joung Cha )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 46권 2호 발행 연도 : 2022 페이지 : pp. 219-231 (13 pages)

다운로드

(기관인증 필요)

초록보기

This study sought to typify incontinence symptoms and how women over sixty perceive incontinence panties and pads. The study uses Q methodology to analyze the perception of these products by type. The research utilized Q methodology and the QUANL pc program for analysis. Type 1 was a type of depression and anxiety due to incontinence. Type 1 was a type of thinking that incontinence was hidden from others. Type 2 was a smellsensitive reclusion. Type 2 was most concerned about smell, as people sometimes avoid interpersonal relationships because of urinary incontinence. Type 3 was function-oriented toilet frequently. Type 3 was recognizing that the absorption function of incontinence products is important, as the toilet is frequently used. Type 3 mainly wore underwear among incontinence products and thought that incontinence was not hidden from others. In the case of incontinent women, products that prevent others from feeling the smell of urine were considered important. Future studies should expand on this study's work to analyze practical, currently-existing incontinence products.

KCI등재 SCOPUS

3대학 아이덴티티 상품 개발을 위한 패션 브랜드와의 콜라보레이션 연구 -학외 소비자 집단의 니즈를 중심으로-

저자 : 정진 ( Jin Jeong ) , 김송미 ( Songmee Kim ) , 이유리 ( Yuri Lee )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 46권 2호 발행 연도 : 2022 페이지 : pp. 232-249 (18 pages)

다운로드

(기관인증 필요)

초록보기

As the postsecondary school-age population continues to decline, the competition among universities to attract potential students has intensified. As an alternative, we propose to introduce a collaborative marketing strategy to universities to gain the attention of precollege students and parents. This study examines perceived fit, the prestige of university and fashion brands, consumption values, and the category of fashion brands in the context of collaboration between university identity and fashion brands. Utilizing an online survey, we collected 391 responses. The results indicate that perceived fit between universities and fashion brands has a significant impact on the purchase intention of collaborative university merchandise. In addition, the prestige of fashion brands plays a key role, while the prestige of universities has no direct effect on purchase intention. However, the indirect effect of university prestige on purchase intention mediated by perceived fit is significant. Also, this study confirms that social value and emotional value have significant impacts on purchase intention. These findings present a guideline for selecting a collaborative partner, which is the most important task in a collaboration strategy. Finally, merchandising strategies reflected consumption values based on precollege students and their parents' needs are proposed.

KCI등재 SCOPUS

4Development of Rushan (襦衫) and Qun (裙) Patterns for Traditional Chinese Wedding Dresses Using a Virtual Fitting Program

저자 : Xiang Liu , Chuyeon Suh

발행기관 : 한국의류학회 간행물 : 한국의류학회지 46권 2호 발행 연도 : 2022 페이지 : pp. 250-271 (22 pages)

다운로드

(기관인증 필요)

초록보기

Traditional wedding dresses have had a high market demand in China in recent years. Traditional wedding dresses from the Tang dynasty occupy an important position among traditional Chinese dresses, and they are also favored by young women. This study was conducted to develop the rushan and qun patterns of traditional wedding dress styles from the Tang dynasty for women in their twenties in China. For this purpose, the rushan and qun patterns of Tang and Song dynasty dresses and modern traditional dresses were collected and analyzed. Additionally, the developed patterns were validated for suitability through appearance evaluations of virtual and real fittings. The following proportions of the developed patterns were proposed: H/3.3 for rushan length, H/33 for collar width, H/1.08 for total sleeve length, H/6 for sleeve width, H/8.5 for sleeve hem width, and H/1.55 for qun length. In addition, the developed patterns received high scores in the appearance evaluations of the virtual and real fittings. Therefore, the developed rushan and qun patterns are expected to have high utility in the current traditional wedding dress industry.

KCI등재 SCOPUS

5고려시대 여성의복의 미적특성 연구

저자 : 김은경 ( Eun Kyoung Kim ) , 채금석 ( Keum Seok Chae )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 46권 2호 발행 연도 : 2022 페이지 : pp. 272-291 (20 pages)

다운로드

(기관인증 필요)

초록보기

The purpose of this study is to analyze the external characteristics of the clothes formed from the culture and worldview of Goryeo women and to identify the aesthetic characteristics. This paper posits the following: First, that the practice of Buddhism contributed to gender equality between Goryeo women and men; second, that Goryeo had a worldview of unified as in with the East and Korea differentiating from the dichotomous thinking of the West; and third, that the aesthetic characteristics of Goryeo women's clothing included (a) color contrast and an emphasis on patterns based on Pure Land Buddhism and Esoteric Buddhism; (b) The beauty of unitary convergence is the beauty of freedom as an expression of various cultural exchanges and the free and open ways of thinking of Goryeo women; (c) an expression of rhythmical beauty, with the shape of line led to straight to curve line and the change of line through human body's movements; and (d) a perfect balance of proportion and symmetry based on Pure Land Buddhism.

KCI등재 SCOPUS

6사회적 규범으로서 마스크 필수 착용이 외출 시 패션 제품 선택에 미치는 영향에 대한 탐색적 연구 -20~30대 한국 여성을 중심으로-

저자 : 박수진 ( Sujin Park ) , 하지수 ( Jisoo Ha )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 46권 2호 발행 연도 : 2022 페이지 : pp. 292-309 (18 pages)

다운로드

(기관인증 필요)

초록보기

The ongoing COVID-19 pandemic has caused a recession in the fashion industry. Therefore, this study aims to assess the influence of face masks on the selection of fashion products by Korean women in their twenties and thirties. This is highly relevant as the mandatory donning of face masks becomes a social norm. To this end, an in-depth interview and a survey were conducted. The results indicate that wearing a face mask affects consumers' fashion selection criteria in regard to styles, materials, colors, and types. Face masks have gradually contributed to the unification and simplification of fashion styles due to the atmosphere and wearing of the mask itself, which has led to a decline in the overall interest in fashion. Most consumers in this study felt a disconnect between face masks and fashion products, since the former have not been established within most fashion styles. Consequently, consumers had difficulty naturally aligning face masks with various fashion styles, which eventually led to a decreased interest in fashion. This study is significant in that it provides objective data that can be utilized to establish strategies in the fashion industry regarding the integration of face masks.

KCI등재 SCOPUS

7상지 부위별 압박수준에 따른 EEG 상대 알파파 스펙트럼과 주관적 선호도 분석

저자 : 박선희 ( Sunhee Park ) , 이예진 ( Yejin Lee )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 46권 2호 발행 연도 : 2022 페이지 : pp. 310-320 (11 pages)

다운로드

(기관인증 필요)

초록보기

This study aimed to ascertain the most efficient level of compression to be applied on a particular area along the upper extremities whilst developing functionality to prevent musculoskeletal disorders among workers who frequently use their arms. The compression areas were divided into upper arm, forearm, and wrist. The compression levels were applied using three types of bands. Comparisons on these bands' usability were based on evaluations of recorded brainwaves and subjective sensation response. Nine men in their twenties were selected for the experiment. The results revealed that when compression was applied, the left and right occipital lobes, plus the parietal lobe, were activated. Also, the alpha wave activity tended to increase, thereby exemplifying the compression's positive effects. The most physiologically efficient and subjectively preferred compression levels were 1.3 and 2.6 kPa for the upper arm and wrist. Furthermore, the compression level at the forearm should be at least 2.0 kPa.

KCI등재 SCOPUS

8스트라이프 조건에 따른 2차원 이미지와 3차원 가상착의 이미지의 착용효과 비교

저자 : 박소영 ( Soyoung Park ) , 이예진 ( Yejin Lee )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 46권 2호 발행 연도 : 2022 페이지 : pp. 321-330 (10 pages)

다운로드

(기관인증 필요)

초록보기

This study analyzed the difference between 2D image and 3D virtual clothing images based on stripe arrangement to obtain fundamental data for slim appearance. First, the slimming effect according to the three types of stripe ratio was examined. Subsequently, the slimming effects of seven types of one-piece dress designs according to the stripe location were analyzed. Subjective ranking was evaluated. The width items and radius of curvature were measured for the image's respective parts. Consequently, in 2D image and 3D virtual clothing images, the one with the narrowest stripe ratio was evaluated as the slimmest; however, the conditions for the slimming effect were different. In the seven one-piece dress designs, a difference was apparent in the ranking of the 2D image and 3D virtual clothing images. In the 3D virtual clothing image, arranging the stripes on the entire garment proved inefficient. The stripes were curved according to the curvature of the human body, creating an optical illusion that differed from that of the 2D image.

KCI등재 SCOPUS

9수단-목적 사슬이론에 따른 체험용 대여한복업체의 가치구조

저자 : 김민지 ( Min Ji Kim ) , 김순영 ( Soon-young Kim )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 46권 2호 발행 연도 : 2022 페이지 : pp. 331-348 (18 pages)

다운로드

(기관인증 필요)

초록보기

This study explores the value structure of experiential rental Hanbok companies using the means-end chain theory. For this, soft laddering was conducted for nine experiential rental Hanbok companies located in Jeonju Hanok Village. Next, the value structure was created. The results are as follows. First, the elicited values are in the following order: “creation of wealth,” “promotion of Korean culture,” “aesthetic value,” “self-actualization,” “community development,” and “transmission of tradition.” Second, most attributes are connected to “creation of wealth.” Third, “promotion of Korean culture” and “community development” are similar to Holden's instrumental values. Fourth, some attributes linked to “aesthetic value” express what the experiential rental Hanbok companies consider to be beautiful. Fifth, the companies pursue “company satisfaction” through “consumer satisfaction” and “company differentiation,” which leads to “self-actualization” and “aesthetic value.” Sixth, it seems that “transmission of tradition” can be achieved through “expertise/expert training,” indicating that some companies think expertise is necessary for the transmission of Hanbok and do it. This study is significant because it is a new attempt to understand the core values of experiential rental Hanbok companies and provides insights into their growth.

KCI등재 SCOPUS

10소비자의 관여와 감각추구성향이 한복선호도와 한복구매행동에 미치는 영향

저자 : 김순아 ( Soon Ah Kim )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 46권 2호 발행 연도 : 2022 페이지 : pp. 349-366 (18 pages)

다운로드

(기관인증 필요)

초록보기

The purpose of this study was to reveal the influence of consumers' Hanbok involvement and arousal seeking tendency on their Hanbok preference and purchasing behavior. The survey subjects were male and female consumers ranging in age from teens to those in their fifties. An online survey was conducted, and 627 people were analyzed. Version 26.0 of SPSS was used to perform a t-test as well as frequency, correlation, factor, reliability, and regression analyses. As a result, both Hanbok involvement and arousal seeking tendency derived four factors each. All four factors of Hanbok involvement had a significant effect on Hanbok preference. Two factors of arousal seeking tendency had a significant effect on Hanbok preference. Hanbok preference had a partially significant effect on Hanbok purchasing behavior. Hanbok involvement and arousal seeking tendency had a partially significant impact on Hanbok purchasing behavior. In conclusion, this study is meaningful in that it, for the first time, derived the factor of Hanbok involvement by considering the concept of involvement as it relates to Hanbok and identified that involvement and arousal seeking tendency are variables that affect Hanbok preference and purchasing behavior.

12
권호별 보기
같은 권호 다른 논문
| | | | 다운로드

KCI등재SCOUPUS

1아동용 장갑의 치수 규격 설계를 위한 손 치수 분석

저자 : 전은경 ( Eunkyung Jeon )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 45권 6호 발행 연도 : 2021 페이지 : pp. 923-934 (12 pages)

다운로드

(기관인증 필요)

초록보기

Most apparel products have national standards for sizing; however, for gloves, national sizing standards have not yet been established. This study aims to analyze children's hand dimensions and propose a size specification for children's gloves that shows children's hand-related size information. Among the 3D measurements of sixth Size Korea Project, the measurement data of 19 dimensions related to the hands of 1,057 boys and girls aged 7-13 years old were analyzed. The distribution and growth trend of hand measurements for boys and girls demonstrated considerable mean differences and distribution trends by gender and age as per hand dimensions, which leads to the conclusion that it is necessary to show these results in the children's glove design. Based on these results, the cross-distribution maps of children's hand length and hand circumference were drafted; furthermore, the distribution relationship with an adult hand size was identified. Based on the distribution of hand sizes, the distribution of adult hand sizes overlapped with children's hand sizes was verified, and children's glove size specifications were presented. The results can be used as useful data such as measures for setting the size range and sizing system for children's gloves.

KCI등재SCOUPUS

2남성 보정 속옷에 대한 인식유형 -30~40대 남성을 중심으로-

저자 : 차수정 ( Su Joung Cha )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 45권 6호 발행 연도 : 2021 페이지 : pp. 935-948 (14 pages)

다운로드

(기관인증 필요)

초록보기

This study aimed to typify men's beliefs, perceptions, values, and attitudes, regarding foundation underwear, and examine the characteristics of each perception. Thirty-one statements on men's correctional underwear were selected, and Q classification was conducted with 20 men in their 30s and 40s as the P samples. Factors were extracted using principal component analysis and varimax rotation. Type 1 was the “fit improvement disadvantage cover type”, which covered the target area, and improved the clothing fit. Type 2 was referred to as the “highlighting the advantages of chest correction” type, that was used to improve chest correction and exercise efficiency. “Positive wear for compensation of the abdomen”, was listed as type 3, and was worn for abdominal correction. It was believed that type 3 could be used to correct body shape even if it was uncomfortable. Type 4, the “hip-up correction functional type”, emphasized functionality based on its hip-up correction design.

KCI등재SCOUPUS

3데이터 표준화를 위한 패션 감성 분류 체계

저자 : 박낭희 ( Nanghee Park ) , 최윤미 ( Yoonmi Choi )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 45권 6호 발행 연도 : 2021 페이지 : pp. 949-964 (16 pages)

다운로드

(기관인증 필요)

초록보기

Accumulation of high-quality data is crucial for AI learning. The goal of using AI in fashion service is to propose of a creative, personalized solution that is close to the know-how of a human operator. These customized solutions require an understanding of fashion products and emotions. Therefore, it is necessary to accumulate data on the attributes of fashion products and fashion emotion. The first step for accumulating fashion data is to standardize the attribute with coherent system. The purpose of this study is to propose a fashion emotional classification system. For this, images of fashion products were collected, and metadata was obtained by allowing consumers to describe their emotions about fashion images freely. An emotional classification system with a hierarchical structure, was then constructed by performing frequency and CONCOR analyses on metadata. A final classification system was proposed by supplementing attribute values with reference to findings from previous studies and SNS data.

KCI등재SCOUPUS

4Comparison of Avatar Posture Formation According to 3D Virtual Garment Modeling Programs-Focusing on Cycling Movements of High-School Male Cyclist-

저자 : Hyunjeong Park , Wolhee Do

발행기관 : 한국의류학회 간행물 : 한국의류학회지 45권 6호 발행 연도 : 2021 페이지 : pp. 965-977 (13 pages)

다운로드

(기관인증 필요)

초록보기

The study aimed to analyze the functional differences in 3D virtual garment programs and compare body scan data with the corresponding 3D virtual models. We selected 3D virtual garment programs, formed virtual models in a representative size for high-school male cyclists, and analyzed them using the Design-X program. The results were as follows. In the 3D virtual garment programs, the anthropometric items for virtual model forming differed significantly from the standard anthropometric items suggested by Size Korea. Comparing the lower body scan data and virtual models formed by the 3D virtual garment programs, the biggest difference was in the shapes of the waist and hips, i.e., the flatness values of the waist and hips were different for each program in the cross-section view. In the lower body, a data-input-based program was needed for changing the exact measurement position of the waist circumference and hips' shape in detail. If a 3D virtual garment program provides functions for the virtual model's joint angle input and free motion transformation, it is expected to be widely used in the sportswear industry.

KCI등재SCOUPUS

5인공신경망을 이용한 드레이프성 예측

저자 : 이소민 ( Somin Lee ) , 유동주 ( Dongjoo Yu ) , 신보나 ( Bona Shin ) , 윤선영 ( Seonyoung Youn ) , 심명희 ( Myounghee Shim ) , 윤창상 ( Changsang Yun )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 45권 6호 발행 연도 : 2021 페이지 : pp. 978-985 (8 pages)

다운로드

(기관인증 필요)

초록보기

This study aims to propose a prediction model for the drape coefficient using artificial neural networks and to analyze the nonlinear relationship between the drape properties and physical properties of fabrics. The study validates the significance of each factor affecting the fabric drape through multiple linear regression analysis with a sample size of 573. The analysis constructs a model with an adjusted R2 of 77.6%. Seven main factors affect the drape coefficient: Grammage, extruded length values for warp and weft (mwarp, mweft), coefficients of quadratic terms in the tensile-force quadratic graph in the warp, weft, and bias directions (cwarp, cweft, cbias), and force required for 1% tension in the warp direction (fwarp). Finally, an artificial neural network was created using seven selected factors. The performance was examined by increasing the number of hidden neurons, and the most suitable number of hidden neurons was found to be 8. The mean squared error was .052, and the correlation coefficient was .863, confirming a satisfactory model. The developed artificial neural network model can be used for engineering and high-quality clothing design. It is expected to provide essential data for clothing appearance, such as the fabric drape.

KCI등재SCOUPUS

6Development of a Pants Pattern for Chinese Women in Their 20s Using a Virtual Fitting Method

저자 : Nan Wu , Chuyeon Suh

발행기관 : 한국의류학회 간행물 : 한국의류학회지 45권 6호 발행 연도 : 2021 페이지 : pp. 986-1003 (18 pages)

다운로드

(기관인증 필요)

초록보기

This study was conducted to develop a basic pants pattern reflecting the average body shape of Chinese women in their 20s by using a virtual fitting method. A formula for the research pattern was derived by applying the measured value based on the drafting method of existing patterns. The final pattern was presented through two actual fitting processes. The suitability of the final pattern was then verified through a functional evaluation and an appearance evaluation based on an actual fitting and a virtual fitting. As a result of the evaluations, the final pattern reflected the body shape of Chinese women in their 20s and was evaluated as a higher quality pattern compared to existing patterns. The final pattern was based on the omphalion waist circumference. Ease amounts were set to be the omphalion waist circumference + 1.0 cm, hip circumference + 2.0 cm, and the pants length was set to 94 cm.

KCI등재SCOUPUS

7육군 착용형 로봇을 장착하기 위한 기능성 의복 설계 요소 조사

저자 : 엄란이 ( Rani Eom ) , 이예진 ( Yejin Lee )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 45권 6호 발행 연도 : 2021 페이지 : pp. 1004-1016 (13 pages)

다운로드

(기관인증 필요)

초록보기

This study aims to derive the design requirements for functional clothing worn with military wearable robots using a survey of people with military experience. Specifically, 982 adult males with military and muscular exercise experience were surveyed for their demands for the clothing worn with wearable robots during military activities. The study showed that it is necessary to develop functional clothing worn inside robots suitable for frequent movements of soldiers to improve their comfort level of wearable robots. The surveyed soldiers indicated that they preferred the top and bottom clothing with high-pressure levels because the upper body felt fatigued during transportation, while both the upper and lower body got exhausted during marches. The survey of design requirements revealed that the participants preferred a top with long sleeves and a bottom with ankle-length leggings in color similar to current military uniforms. We conclude that it is important to design functional clothing worn inside wearable robots in different forms depending on frequent movements, e.g., with differentiated pressures and material placements.

KCI등재SCOUPUS

8카툰과 웹툰 속에 나타나는 이성주의 복식과 탈코르셋에 관한 고찰

저자 : 유희은 ( Hee-eun Yoo ) , 전재훈 ( Jaehoon Chun )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 45권 6호 발행 연도 : 2021 페이지 : pp. 1017-1034 (18 pages)

다운로드

(기관인증 필요)

초록보기

The “Escape the corset” movement raises the question of gender norms in dressing by rejecting the socially established ideal women's clothing. The context is similar to Rational dress of the 19th century, which claimed that women could also wear pants. Cartoons and webtoons reflect the characteristics of each era, including images and stories, and express social problems of the time implicitly and satirically. Thus, this study examined women's clothes expressed in cartoons and webtoons and analyzed their characteristics. The results are as follows. As an expression to the recipient of both clothes, women tried to form their identity through a rational attitude and break away from their embellishment, which was regarded as oppression from society. On the other hand, as an expression of the attitude of others towards the recipient of both clothes, people argued the changed appearance of women as a non-ideal form which should be corrected. This study is significant for proving that the dressing contains gender norms of the time beyond the trends.

KCI등재SCOUPUS

9국내산과 태국산 닥섬유 및 목재펄프가 혼합된 줌치한지의 감물염색에 따른 강도 특성

저자 : 홍희숙 ( Heesook Hong ) , 김기억 ( Gi-eok Kim ) , 고정녀 ( Jungnye Koh )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 45권 6호 발행 연도 : 2021 페이지 : pp. 1035-1051 (17 pages)

다운로드

(기관인증 필요)

초록보기

This study compares the strength properties of Jumchi-Hanjis dyed with 70% and 100% persimmon juice concentrations and undyed Jumchi-Hanjis. The Juumchi-Hanjis were made from Dakjis (mulberry papers), which were mixed with different ratios of fibers from paper mulberries originating in Korea and Thailand, including wood pulp from Canada. Research results showed that tensile, wet tensile, and bursting strengths of Jumchi-Hanjis dyed with 70% concentration were higher than those of undyed Jumchi-Hanjis. However, the tearing strengths of the dyed Jumchi-Hanjis were lower than those of undyed Jumchi-Hanjis. The wet tensile strengths of Jumchi-Hanjis dyed with 100% concentration were higher than those of dyed with 70% concentration. The increase and decrease of tensile, tearing, and bursting strengths depending on persimmon juice dyeing differed as per the mixing ratio of the raw materials of Jumchi-Hanjis. Dyeing with 100% persimmon juice concentration tends to be more useful than 70% to increase the tensile (MD) and wet tensile strengths of Jumchi-Hanjis containing only Korean mulberry fibers (90%) and wood pulp (10%) as raw materials. Dyeing with 100% concentration tends to be less useful than 70% to increase the tensile, tearing and bursting strengths of Jumchi-Hanjis with high proportions (90% or 60%) of mulberry fibers from Thailand.

KCI등재SCOUPUS

10자외선 경화형 디지털 프린팅을 이용한 3D 프린팅 TPU 소재의 색채 특성

저자 : 이선희 ( Sunhee Lee ) , 박소연 ( Soyeon Park ) , 정임주 ( Imjoo Jung ) , 이정순 ( Jungsoon Lee )

발행기관 : 한국의류학회 간행물 : 한국의류학회지 45권 6호 발행 연도 : 2021 페이지 : pp. 1052-1062 (11 pages)

다운로드

(기관인증 필요)

초록보기

This study aims to confirm the possibility of Ultra-Violet (UV)-printed 3D printing materials using thermal polyurethane (TPU) with CMYK colors by applying an eco-friendly UV digital printing process. A UV-printed 3D printing TPU material was prepared with cycles of UV printing and CMYK colors. Dyeability of the 3D TPU samples with cycles of UV printing and CMYK were analyzed for thickness, weight, surface roughness, reflectance, colorimetry, and K/S values. The thickness and weight of 3D-printed TPU samples with cycles of UV printing are increased with overprints from 1 to 5. The surface roughness of 3D-printed TPU samples with increasing UV prints were decreased, meaning that the surface of TPU samples becomes gradually smoother. The reflectance spectra of CMYK UV-printed TPU samples showed the surface reflectance within each characteristic wavelength of CMYK. The 3D-printed TPU samples, subjected to UV printing twice or more, showed low surface reflectance. After examining the L*a*b* of the 3D-printed TPU samples by the cycles of UV printing, the study found that the more UV got printed more than 2 times, the closer the color to each CMYK.

12
발행기관 최신논문
자료제공: 네이버학술정보
발행기관 최신논문
자료제공: 네이버학술정보

내가 찾은 최근 검색어

최근 열람 자료

맞춤 논문

보관함

내 보관함
공유한 보관함

1:1문의

닫기