논문 상세보기

한국경영공학회> 한국경영공학회지> ISO 경영시스템의 심사보고서 분석을 통한 지속가능경영 개선 포인트에 관한 연구

KCI등재

ISO 경영시스템의 심사보고서 분석을 통한 지속가능경영 개선 포인트에 관한 연구

A study on improvement points for sustainable management through the analysis of the ISO management system audit report

김종헌 ( Kim Jong-hun ) , 구일섭 ( Koo Il-seob )
  • : 한국경영공학회
  • : 한국경영공학회지 26권3호
  • : 연속간행물
  • : 2021년 09월
  • : 47-60(14pages)
한국경영공학회지

DOI

10.35373/KMES.26.3.3


목차

1. 서론
2. 이론적 배경
3. 연구의 설계
4. 실증분석
5. 결론
참고문헌

키워드 보기


초록 보기

Purpose The purpose of this study is to analyze the PDCA cycle aspect through empirical analysis of the ISO certification audit report that evaluates the organization's process and overall system management based on ISO 9001, ISO 14001, and ISO 45001, and to find improvement points for the company's sustainability management.
Method An empirical analysis was conducted focusing on the ‘observation’ presented in 424 audit reports prepared during the ISO management system certification audit and follow-up management audit conducted by Certification Body A from 2018 to 2020.
Results The requirements for improvement in each ISO management system include resources(7.1), production and service provision(8.5) in ISO 9001, actions to address risks and opportunities(6.1) and emergency preparedness and response(8.2) in ISO 14001, ISO 45001 identified competence(7.2), operation planning and control(8.1), and emergency preparedness and response(8.2).
Conclusion It is very meaningful to explore the points and directions for building a foundation for sustainable management and improving it based on the audit findings presented in the existing ISO management system audit report. Based on this point, it is judged that it will be possible to clearly recognize the core goals pursued by each ISO management system and to develop efficient management activities that can increase the value of the management system.

UCI(KEPA)

간행물정보

  • : 사회과학분야  > 경영학
  • : KCI등재
  • :
  • : 계간
  • : 2005-7776
  • : 2713-573X
  • : 학술지
  • : 연속간행물
  • : 2011-2021
  • : 449


저작권 안내

한국학술정보㈜의 모든 학술 자료는 각 학회 및 기관과 저작권 계약을 통해 제공하고 있습니다.

이에 본 자료를 상업적 이용, 무단 배포 등 불법적으로 이용할 시에는 저작권법 및 관계법령에 따른 책임을 질 수 있습니다.

26권4호(2021년 12월) 수록논문
최근 권호 논문
| | | |

KCI등재

1스마트공장에 대한 이해가 스마트공장 구축성과에 미치는 영향 : 정부지원요소의 매개효과를 중심으로

저자 : 전대흥 ( Jun Dae Hung ) , 구일섭 ( Koo Il Seob )

발행기관 : 한국경영공학회 간행물 : 한국경영공학회지 26권 4호 발행 연도 : 2021 페이지 : pp. 1-10 (10 pages)

다운로드

(기관인증 필요)

초록보기

Purpose This study intends to examine the effect of members' understanding of the smart factory of SMEs that introduce and build a smart factory and the government-level support on the construction performance through empirical analysis.
Method The subjects of the study were 3 business (automotive, machinery, electronic) companies participating in the 'Specialized Smart Factory Construction Support Project for Each Industry' conducted by the Korea Chamber of Commerce in 2020 was analyzed using SPSS 18.0.
Result Hypothesis that understanding of smart factory will have a significant effect on smart factory performance was adopted. The provision of the government-level foundation that can be the basis of the smart factory was found to play a mediating role between the SMEs' understanding of the smart factory and the performance of building the smart factory. However, it was found that government-level financial support does not play a mediating role between SMEs' understanding of smart factories and the performance of smart factories.
Conclusion Based on these research results, smart factory construction support needs to target companies that have a sufficient understanding of smart factories. In particular, I think it needs to be prioritized that professional manpower education and training, information provision, and benchmarking opportunities for smart factory construction companies are more important than anything else.

KCI등재

2국가 R&D 성과의 효율성 비교 분석: 연구관리전문기관을 중심으로

저자 : 최가영 ( Choi Ga Yeong ) , 조남욱 ( Cho Nam Wook )

발행기관 : 한국경영공학회 간행물 : 한국경영공학회지 26권 4호 발행 연도 : 2021 페이지 : pp. 11-24 (14 pages)

다운로드

(기관인증 필요)

초록보기

Purpose The purpose of this study is to compare and analyze the efficiency of R&D projects depending on their managing institutions.
Methods In this study, the quantitative and qualitative efficiency of scientific and technological performance of 'SW Computing Industry Source Technology Development Projects' from 2009 to 2018 were analyzed using Data Envelopment Analysis(DEA) techniques.
Results IITP(Institute of Information & communications Technology Planning & evaluation) showed better scientific efficiency than KEIT(Korea Evaluation Institute of Industrial Technology) in terms of quantitative and qualitative efficiency. In contrast, KEIT management task showed better technological performance, in particular qualitative efficiency, than IITP. The results indicate that the difference in managing institutions can make a difference in terms of R&D performance.
Conclusion This study is meaningful in that it confirmed that there are differences in national R&D efficiency depending on the management institution, and it can provide guidelines for R&D project management policies.

KCI등재

3분류나무 기법에 기초한 공급사슬 회복성, 강건성, 민첩성과 공급사슬 성과의 평가

저자 : 조성빈 , 김진한

발행기관 : 한국경영공학회 간행물 : 한국경영공학회지 26권 4호 발행 연도 : 2021 페이지 : pp. 25-42 (18 pages)

다운로드

(기관인증 필요)

초록보기

Purpose This study empirically analyzes the impact of three types of supply chain strategies(resilience, robustness, agility) for supply chain risk on supply chain performances.
Methods We statistically measure the main types of supply chain strategies into resilience, robustness and agility using data collected by survey methods. SC strategies' performance is evaluated by adopting general supply chain performances. In order to unveil more precise causality relationship between strategies and performance, we use classification tree technique in the field of data mining.
Results The results reveal that all types of supply chain strategies are important for overall performances. In particular, regulating supply chain process for reducing cycle time is crucial for supply chain quality. Besides, meeting customer needs is essential for order fulfillment, recovering material logistics is for delivery speed, meeting customer needs is for partner satisfaction, and recovering material logistics is for independent delivery.
Conclusion The findings of this study provide important empirical evidences on supply chain performances by each supply chain strategies with results supporting existing conceptual literatures.

KCI등재

4대학생 아르바이트의 감정노동 특성이 스트레스와 직무만족에 미치는 영향

저자 : 우태희 ( Woo Tae Hee ) , 엄기수 ( Eum Kee Soo )

발행기관 : 한국경영공학회 간행물 : 한국경영공학회지 26권 4호 발행 연도 : 2021 페이지 : pp. 43-65 (23 pages)

다운로드

(기관인증 필요)

초록보기

Purpose The purpose is to empirically investigate the effects of emotional labor characteristics on the job of part-time college students and to suggest improvement in the work environment.
Methods The survey was conducted on part-time college students, and statistical analysis and hypothesis verification were conducted. The results of the study areas follows.
Results First, the surface acting of emotional labor showed the highest score of 3.70/5.0, followed by job stress, job satisfaction, and deep acting. Second, It was found that working hours had a negative(-) effect on deep acting, and the frequency of face-to-face with customers had a positive(+) effect on surface acting. Third, deep acting has a positive(+) effect on job satisfaction, surface acting has a positive(+) effect on job stress, and job stress has a negative(-) effect on job satisfaction.
Conclusion The purpose of university student part-time jobs is financial, but there are also career exploration, career accumulation, and social improvement. And above all, the emotional labor issue requires support from social awareness, related laws, and social institutions. This study presents basic data because the number of samples is not sufficient to analyze with the structural model, and the related previous studies are also lacking.

KCI등재

5코스닥 시장의 대주주와 일반주주 간 기울어진 운동장에 관한 실증 사례연구: 최대주주 변경 후 상장폐지 사례 중심으로

저자 : 박치영 ( Park Chiyoung ) , 김창은 ( Kim Changeun )

발행기관 : 한국경영공학회 간행물 : 한국경영공학회지 26권 4호 발행 연도 : 2021 페이지 : pp. 67-83 (17 pages)

다운로드

(기관인증 필요)

초록보기

Purpose A stock transfer contract, including a change in the largest shareholder, proceeded with a block deal and was delisted less than three months later, causing major damage to ordinary shareholders on the KOSDAQ market. However, both major shareholders of the contract realized great economic benefits. We would like to confirm that uneven of KOSDAQ regulations is creating unfair results between major shareholders and general shareholders.
Methods Robert K. Yin's empirical case study methodology is applied to analyze the unbalanced aspects of the system through objective and various data and fact-checking.
Results As a result of the case analysis, major shareholders, who are the subjects of the stock transfer contract, realized profits by using the imbalance between the system and regulations-mandatory - lock up, disclosure system, and block deal, while general shareholders suffered great economic and mental damage.
Conclusion It could be said that there is an unbalanced system centered on major shareholders in the cause of the occurrence of the case. If the regulations don't improve, this case can be repeated, and general shareholders suffer the same damage.

1
권호별 보기
같은 권호 다른 논문
| | | | 다운로드

KCI등재

1의사결정나무 Random Forest를 이용한 스마트워치 이용자의 만족도와 추천의도에 대한 영향요인 분석

저자 : 박경원 ( Park¸ Kyoungwon ) , 조성빈 ( Cho¸ Sungbin )

발행기관 : 한국경영공학회 간행물 : 한국경영공학회지 26권 3호 발행 연도 : 2021 페이지 : pp. 1-21 (21 pages)

다운로드

(기관인증 필요)

초록보기

Purpose This study analyzes influencing factors on smart phone user's perceived satisfaction, continuous use intention, and recommendation intention.
Methods The influencing factors include usefulness, convenience, appearance, enjoyment, innovation, security, and privacy, whereas response is measured through satisfaction, continuous use intention, and recommendation intention. Two methods are employed - decision tree using GINI index and random forest approach.
Results The analysis results revealed that most significant factors for user's satisfaction and continuous use intention are usefulness in daily life and that usefulness in daily life and fashion are influential to recommendation intention. According to the Random Forest Model, the importance of usefulness in daily life and efficient handling of tasks were crucial for satisfaction level, the importance of rapid access to information for continuous use intention, and a combination of fashion for recommendation intention.
Conclusion The findings of this study are consistent with existing literature in the sense that the usefulness is important. We additionally suggest that fast information accessibility and fashion should be recognized as important factors in smart watch industry.

KCI등재

2직관 퍼지 와이블 분포에서 알파 컷 셋을 이용한 시스템 신뢰성 분석

저자 : 최성운 ( Choi¸ Sungwoon )

발행기관 : 한국경영공학회 간행물 : 한국경영공학회지 26권 3호 발행 연도 : 2021 페이지 : pp. 23-46 (24 pages)

다운로드

(기관인증 필요)

초록보기

Purpose This study is to analyze system reliability using fuzzy Weibull lifetime distribution in which scale parameters are assumed to be Intuitionistic Fuzzy Set (IFS) with α-cut set due to uncertainties and inaccuracy of data.
Methods The IFS is utilized to present the information of membership function and non-membership function with the three intervals that include belief, disbelief and unbelief functions. The paper discusses the intuitionistic fuzzy Weibull system reliability models to assess the membership function and non-membership function by considering the different types of component intuitionistic fuzzy scale parameter. Due to the existence of different types of uncertainties, the three types of component TIFS (Triangular IFS) and TrIFS (Trapezoidal IFS) with α-cut set were presented for computing intuitionistic fuzzy system reliability in both series structure and parallel structure.
Results The validity of proposed model is demonstrated by analyzing intuitionistic fuzzy Weibull system reliabilities with α-cut set using different types of intuitionistic fuzzy scale parameter. A numerical example is indicated to discuss the usefulness and practicality of the proposed model.
Conclusions When conducting a group decision making for evaluating the intuitionistic fuzzy Weibull system reliability, α-cut set models proposed in this paper can be used to reflect various experts' judgments on agreement, disagreement and undecidedness when evaluating system reliability.

KCI등재

3ISO 경영시스템의 심사보고서 분석을 통한 지속가능경영 개선 포인트에 관한 연구

저자 : 김종헌 ( Kim Jong-hun ) , 구일섭 ( Koo Il-seob )

발행기관 : 한국경영공학회 간행물 : 한국경영공학회지 26권 3호 발행 연도 : 2021 페이지 : pp. 47-60 (14 pages)

다운로드

(기관인증 필요)

초록보기

Purpose The purpose of this study is to analyze the PDCA cycle aspect through empirical analysis of the ISO certification audit report that evaluates the organization's process and overall system management based on ISO 9001, ISO 14001, and ISO 45001, and to find improvement points for the company's sustainability management.
Method An empirical analysis was conducted focusing on the 'observation' presented in 424 audit reports prepared during the ISO management system certification audit and follow-up management audit conducted by Certification Body A from 2018 to 2020.
Results The requirements for improvement in each ISO management system include resources(7.1), production and service provision(8.5) in ISO 9001, actions to address risks and opportunities(6.1) and emergency preparedness and response(8.2) in ISO 14001, ISO 45001 identified competence(7.2), operation planning and control(8.1), and emergency preparedness and response(8.2).
Conclusion It is very meaningful to explore the points and directions for building a foundation for sustainable management and improving it based on the audit findings presented in the existing ISO management system audit report. Based on this point, it is judged that it will be possible to clearly recognize the core goals pursued by each ISO management system and to develop efficient management activities that can increase the value of the management system.

KCI등재

4장애가 있는 바리스타를 위한 작업 동선을 최소화하는 작업 공간 배치에 관한 연구: 유전 알고리즘의 응용

저자 : 김우성 ( Kim¸ Woo-sung ) , 박경수 ( Park¸ Kyungsu )

발행기관 : 한국경영공학회 간행물 : 한국경영공학회지 26권 3호 발행 연도 : 2021 페이지 : pp. 61-70 (10 pages)

다운로드

(기관인증 필요)

초록보기

Purpose The goal is to find an optimal workspace design for the convenience of workers and improvement of the work environment in coffee shops where mentally disabled people perform their duties as baristas.
Methods A genetic algorithm is applied to find the optimal arrangement, and chromosome representation, chromosome variation, and crossover operations are presented.
Results By applying the algorithm using the actual data, it was found that the optimal layout reduces the total movement of a worker by 50% compared to the existing one.
Conclusion The results illustrate that the method can help to reduce the fatigue of the worker since total movement of a worker can be reduced.

KCI등재

5시니어 창업 특성이 창업의도와 행동에 미치는 영향

저자 : 김성수 ( Kim¸ Seang Soo ) , 신정철 ( Shin¸ Jung Chul ) , 엄기수 ( Eum¸ Kee Soo )

발행기관 : 한국경영공학회 간행물 : 한국경영공학회지 26권 3호 발행 연도 : 2021 페이지 : pp. 71-86 (16 pages)

다운로드

(기관인증 필요)

초록보기

Purpose The purpose of this study is to identify the influence of characteristic factors affecting senior's entrepreneurial intention and entrepreneurial intention, and to propose measures to promote senior start-up.
Methods As a research method, a survey was conducted on senior start-up school students, which was analyzed with a PLS-based structural model (Partial Least Square SEM) using SmartPLS3.0. The results of the study are as follows.
Results First, initiative, innovation, and start-up satisfaction were found to have a significant impact on entrepreneurial intention and entrepreneurial behavior, so the hypothesis was adopted. Second, the effects on entrepreneurial intention of risk-taking and social awareness were rejected and excluded from the model. Third, the hypothesis that entrepreneurial intention acts as a medium between initiative, innovation, satisfaction on start-up and entrepreneurial behavior was adopted.
Conclusion It has been found that satisfaction on start-up, innovation, and initiative affect senior's entrepreneurial intention and entrepreneurial behavior. And It was suggested as a way to entrepreneurial behavior activation plan considering the characteristics of seniors.

KCI등재

6Kano 모델 및 Timko의 계수를 활용한 자재 관리 품질 특성 연구

저자 : 정준일 ( Jung¸ Jun Il ) , 이주용 ( Lee¸ Ju Yong ) , 한준희 ( Han¸ Jun Hee )

발행기관 : 한국경영공학회 간행물 : 한국경영공학회지 26권 3호 발행 연도 : 2021 페이지 : pp. 87-97 (11 pages)

다운로드

(기관인증 필요)

초록보기

Purpose In cases of inventory management at small and medium-sized manufacturing companies, it is difficult to distinguish priorities of on-site inventory management, and the activities to identify and improve inventory management problems are not clear. To solve these problems, we suggest the methodology to present the quality characteristics that need improvement first.
Methods We propose the quality characteristics that need improvement by applying the methodology. We define the quality attributes of inventory management and classify the quality characteristics through a survey applying Kano model. Using the results of the survey, Timko's customer satisfaction coefficient is calculated to improve the quality of inventory management.
Results The proposed model is validated through a case study of a shipbuilding equipment manufacturing company. The model identified and classified 11 attributes of the quality of inventory management. The reliability of these attributes are verified by the Cronbach's alpha (α).
Conclusion The proposed model contributes to identify key attributes that affect the manufacturer's inventory management. The model can also provide priorities of the attributes that need to be improved first. Therefore, this research can help to clearly identify and progress the improvement activities that are really needed in practical manufacturing companies.

KCI등재

7외부지향 기업문화와 직무소진 간의 관계: 조직 내 커뮤니케이션의 매개효과와 HR부서의 전략적 역할의 조절된 매개효과

저자 : 홍소정 ( Hong¸ Sojung ) , 심명정 ( Shim¸ Myungjung ) , 이윤수 ( Lee¸ Yunsoo )

발행기관 : 한국경영공학회 간행물 : 한국경영공학회지 26권 3호 발행 연도 : 2021 페이지 : pp. 99-119 (21 pages)

다운로드

(기관인증 필요)

초록보기

Purpose This study aimed to investigate the mediating effect of communication and the moderated mediating effect of the role of human resource (HR) in the relationship between external-oriented organizational culture and burnout.
Methods We analyzed the responses of 10,005 employees from the 2017 human capital corporate panel (HCCP) dataset with SPSS PROCESS macro.
Results (1)The moderating effect of the role of HR was significant. (2)Communication partially mediated the relationship between innovative-oriented culture and burnout and fully meditated the relationship of task-oriented culture and burnout. (3)The moderated mediating effect of the role of HR was significant.
Conclusion Based on the findings, the present study discussed implications on the relationship between organizational culture and burnout according to the role of HR effect.

KCI등재

8중국 배달 앱 서비스 품질 특성이 이용자의 지각된 가치에 미치는 영향 연구

저자 : 왕금암 ( Jin-yan Wang ) , 이승배 ( Seung-bae Lee )

발행기관 : 한국경영공학회 간행물 : 한국경영공학회지 26권 3호 발행 연도 : 2021 페이지 : pp. 121-139 (19 pages)

다운로드

(기관인증 필요)

초록보기

Purpose The purpose of this study is to examine the effect of service quality characteristics on the perceived value of users with consumers who have experience in using delivery apps in China, which is the largest market in the world.
Methods For research analysis, samples were secured through an online survey with Chinese consumers and statistical tests were performed using IBM SPSS 26. Hierarchical regression analysis was conducted to test the research hypothesis, and 3-step mediated regression analyses and moderating effect analyses were performed for mediating effect analysis.
Results Convenience, reliability, and stability among the service quality factors were found to have significant positive (+) effects on the perceived value, but informativity was found to have no significant effect on the perceived value. Social impacts had mediating effects between service quality and perceived value, but there was no moderating effect of personal innovativeness between service quality and perceived value.
Conclusion The service quality factor to which Chinese consumers give top priority when using delivery apps is stability. Therefore, online service quality should be managed so that consumers can use the service feeling easy by securing the stability of information security.

1
발행기관 최신논문
자료제공: 네이버학술정보
발행기관 최신논문
자료제공: 네이버학술정보

내가 찾은 최근 검색어

최근 열람 자료

맞춤 논문

보관함

내 보관함
공유한 보관함

1:1문의

닫기