논문 상세보기

한국의류산업학회> 한국의류산업학회지> 아세테이트 직물의 NaOH 처리시 무기염 첨가에 따른 영향

KCI등재

아세테이트 직물의 NaOH 처리시 무기염 첨가에 따른 영향

The Effect of Sodium Acetate in Alkaline Treatment of Acetate Fabrics

성종미 ( Jong Mi Sung ) , 김혜림 ( Hye Rim Kim ) , 송화순 ( Wha Soon Song )
  • : 한국의류산업학회
  • : 한국의류산업학회지 7권1호
  • : 연속간행물
  • : 2005년 01월
  • : 1-6(6pages)
한국의류산업학회지

DOI


목차


					

키워드 보기


초록 보기

The effect of sodium acetate to reduce the fiber damage and hardening of acetate fabrics during alkaline treatment is studied. The optimal condition is controlled concentration 2%, at 50°C for 6 minutes and at 70°C for 2 minutes through the result of weight loss, shrinkage and tensile strength. Alkaline treated acetate fabrics under optimal condition show softer than untreated acetate fabrics. Alkaline treatment with sodium acetate brings the reduction in hardening and shrinkage in internal fiber of acetate fabric. Also, alkaline treatment with sodium acetate improves the tensile strength of acetate fabrics compared with only alkaline treatment. The moisture regain of acetate fabrics is also improved by alkaline treatment under optimal condition.

UCI(KEPA)

I410-ECN-0102-2009-590-001789825

간행물정보

  • : 자연과학분야  > 가정
  • : KCI등재
  • :
  • : 격월
  • : 1229-2060
  • : 2287-5743
  • : 학술지
  • : 연속간행물
  • : 1999-2022
  • : 2089


저작권 안내

한국학술정보㈜의 모든 학술 자료는 각 학회 및 기관과 저작권 계약을 통해 제공하고 있습니다.

이에 본 자료를 상업적 이용, 무단 배포 등 불법적으로 이용할 시에는 저작권법 및 관계법령에 따른 책임을 질 수 있습니다.

24권6호(2022년 12월) 수록논문
최근 권호 논문
| | | |

KCI등재

1소프트 로봇용 4D 프린팅 소재

저자 : 이선희 ( Sunhee Lee )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 24권 6호 발행 연도 : 2022 페이지 : pp. 667-685 (19 pages)

다운로드

(기관인증 필요)

초록보기

This paper aims to investigate 4D printing materials for soft robots. 4D printing is a targeted evolution of the 3D printed structure in shape, property, and functionality. It is capable of self-assembly, multi-functionality, and self-repair. In addition, it is time-dependent, printer-independent, and predictable. The shape-shifting behaviors considered in 4D printing include folding, bending, twisting, linear or nonlinear expansion/contraction, surface curling, and generating surface topographical features. The shapes can shift from 1D to 1D, 1D to 2D, 2D to 2D, 1D to 3D, 2D to 3D, and 3D to 3D. In the 4D printing auxetic structure, the kinetiX is a cellular-based material design composed of rigid plates and elastic hinges. In pneumatic auxetics based on the kirigami structure, an inverse optimization method for designing and fabricating morphs three-dimensional shapes out of patterns laid out flat. When 4D printing material is molded into a deformable 3D structure, it can be applied to the exoskeleton material of soft robots such as upper and lower limbs, fingers, hands, toes, and feet. Research on 4D printing materials for soft robots is essential in developing smart clothing for healthcare in the textile and fashion industry.

KCI등재

2Ma Ke(馬可)의 작업에 반영된 도가미학 사상

저자 : 이홍연 ( Hongyan Li ) , 임은혁 ( Eunhyuk Yim )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 24권 6호 발행 연도 : 2022 페이지 : pp. 686-693 (8 pages)

다운로드

(기관인증 필요)

초록보기

The rapid development of the fashion industry in contemporary society has also caused various problems such as environmental pollution, material excess, and spiritual poverty. Accordingly, traditional Chinese Taoist aesthetics can solve the spiritual poverty that people are facing today, and the spiritual pursuit of returning to innocence. This study focuses on the works of first generation Chinese designer Ma Ke as an example to discuss the embodiment and application of Taoist aesthetics. The results are as follows: First, Ma Ke's works emphasize the value of handicraft through traditional handcrafting and natural fibers, which reflect the beauty of simplicity and the non-action of Taoist aesthetics. Second, the works acknowledge nature by using natural materials and retaining their original appearance, which embodies Taoist aesthetics of the beauty in non-action and living in harmony with nature. Third, the collections reflect a critical attitude toward the fashion industry and consumer culture by rethinking consumerism and advocating environmental protection, thus propagating the beauty in simplicity and the harmonious life with nature in Taoism aesthetics. In conclusion, Ma Ke's designs incorporating sustainability and handicraft exhibit the core features of Taoist aesthetics, including the beauty in simplicity, non-action, and living in harmony with nature while exploring the relationship between modernity and tradition, man and nature, and handicraft and fashion. This research can contribute to understanding Ma Ke's works in promoting critical thinking about the fashion industry through Taoist aesthetics.

KCI등재

3동작센싱 스마트레깅스 프로토타입 개발

저자 : 황진희 ( Jin-hee Hwang ) , 지승현 ( Seunghyun Jee ) , 김선희 ( Sun Hee Kim )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 24권 6호 발행 연도 : 2022 페이지 : pp. 694-706 (13 pages)

다운로드

(기관인증 필요)

초록보기

This study focusses on the development of a motion-sensing smart leggings prototype with the help of a module that monitors motion using a fiber-type stretch sensor. Additionally, it acquires data on Electrocardiogram (ECG), respiration, and body temperature signals, for the development of smart clothing used in online exercise coaching and customized healthcare systems. The research process was conducted in the following order: 1) Fabrication of a fiber-type elastic strain sensor for motion monitoring, 2) Positioning and attaching the sensor, 3) Pattern development and three-dimensional (3D) design, 4) Prototyping 5) Wearability test, and 6) Expert evaluation. The 3D design method was used to develop an aesthetic design, and for sensing accurate signal acquisition functions, wearability tests, and expert evaluation. As a result, first, the selection or manufacturing of an appropriate sensor for the function is of utmost importance. Second, the selection and attachment method of a location that can maximize the function of the sensor without interfering with any activity should be studied. Third, the signal line selection and connection method should be considered, and fourth, the aesthetic design should be reflected along with functional verification. In addition, the selection of an appropriate material is important, and tests for washability and durability must be made. This study presented a manufacturing method to improve the functionality and design of smart clothing, through the process of developing a prototype of motion-sensing smart leggings.

KCI등재

4메타버스 가상 패션아이템 구매 - 자기조절초점을 중심으로 -

저자 : 안수경 ( Soo-kyoung Ahn )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 24권 6호 발행 연도 : 2022 페이지 : pp. 707-718 (12 pages)

다운로드

(기관인증 필요)

초록보기

The metaverse is emerging as the next digital environment for people not only to interact and collaborate with others, but also to have virtual consumption experiences. In this study, virtual fashion items for the consumer's digital self are deemed significant products with consumption value. Drawing from the regulatory focus theory, this study examines how consumers' promotion and prevention focus influence value perception and buying behaviors of virtual fashion items in the metaverse context. The data were collected through an online survey. A total of 546 consumers in their twenties who are aware of the metaverse responded to a self-administered questionnaire. The results showed that promotion focus influenced all the perceived consumption values of virtual fashion items such as the economic, visual authority, hedonic, and social value, whereas prevention focus influenced only the visual authority value. Visual authority value negatively affected both purchase intention and willingness to pay premium price, while others had a positive effect. The findings provide theoretical evidence that consumers' regulatory focus is critical in buying virtual fashion items and suggest that marketers devise effective strategies to stimulate consumers' regulatory focus and to emphasize the economic, hedonic, and social value of the items in the metaverse context.

KCI등재

5뷰티 인플루언서 특성과 제품 특성이 신제품 수용의도에 미치는 영향 - 중국 소비자를 대상으로 -

저자 : 쉬루이치 ( Ruiqi Xu ) , 김은혜 ( Eun-hye Kim ) , 이진화 ( Jin-hwa Lee )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 24권 6호 발행 연도 : 2022 페이지 : pp. 719-730 (12 pages)

다운로드

(기관인증 필요)

초록보기

This study explored the impact of beauty influencers' characteristics and product characteristics on new product acceptance intentions and studied the mediating effects of consumer trust in this process. A survey was conducted from February 22, 2021, to February 28, 2021, with Gen Y and Gen Z women in China, and 379 questionnaires were analyzed. The conclusions are as follows: First, the characteristics of beauty influencers are authenticity and expertise, similarity, attractiveness, interactivity, familiarity, and trustworthiness; product characteristics are cost, image, product quality, product perception, sales promotion, and sustainability. Second, partial beauty influencers' characteristics and partial product characteristics have a positive impact on consumer confidence and acceptance intention of the new product. Third, the mediating effect of consumer trust in the process by which beauty influencers' characteristics and product characteristics influence the intention of new product acceptance was determined. Therefore, when beauty companies use influencers in marketing, it is necessary to understand their characteristics, consider their professionality and authenticity, examine their reliability, and assess their ability to form connections with images and viewers that match their products. Additionally, to increase the acceptance intention of new products, companies should present the price of high-quality products, product sensibilities, and corporate images of products and establish measures that can positively affect consumers' acceptance intention of new products by combining them with the characteristics of beauty influencers.

KCI등재

6중고 명품 거래 플랫폼의 속성이 지각된 유용성, 유희성 및 지속사용의도에 미치는 영향

저자 : 강천시 ( Chen Xi Jiang ) , 김미숙 ( Mi Sook Kim )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 24권 6호 발행 연도 : 2022 페이지 : pp. 731-743 (13 pages)

다운로드

(기관인증 필요)

초록보기

This study examined the effects of platforms' attributes(economy, convenience, ease of use, and security) on perceived usefulness, perceived enjoyment, trust, and the continuance intention to use. Data were collected through a survey conducted with 327 users of second-hand luxury goods trading platforms in their twenties and thirties; 300 were used for statistical analysis using SPSS26.0 for exploratory factor analysis and correlation analysis, and AMOS 26.0 for confirmatory factor analysis and structural equation modeling. For the attributes of second-hand luxury goods trading platforms, four factors were extracted: economy, convenience, ease of use and security. The results showed that only the security of second-hand luxury goods platforms had a positive effect on the perceived usefulness of the platform, but other attributes did not influence perceived usefulness. In contrast, all attributes of the platform showed positive effects on perceived enjoyment. Perceived enjoyment had a strong effect on trust; however, perceived usefulness did not affect trust. The continuance intention to use the platforms was most influenced by perceived usefulness, trust, and perceived enjoyment, in that order. The current findings can help marketers of second-hand luxury goods platforms optimize the platforms' attributes based on the marketing objectives and develop strategies to build perceived usefulness and enjoyment first, and in turn, trust and intention to use.

KCI등재

7탈출-추구이론을 중심으로 본 관광쇼핑행동에 대한 비교문화연구 - 한국, 중국, 일본 소비자의 패션쇼핑을 중심으로 -

저자 : 허희진 ( Hee Jin Hur )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 24권 6호 발행 연도 : 2022 페이지 : pp. 744-755 (12 pages)

다운로드

(기관인증 필요)

초록보기

This study sought to verify the shopping values that tourists pursue by purchasing at travel destinations based on tourists' motivation and identify the effects of these values on the types of fashion items preferred by tourists. Furthermore, this study verified the tourist shopping behavior of three Asian countries-Korea, China, and Japan-from a cross-cultural perspective. To obtain a sample that represents tourist shoppers in each country, a survey was conducted on adult men and women in their 20s to 60s, and 986 subjects were collected: 300 Koreans, 385 Chinese, and 301 Japanese. Factor analysis, structural equation modeling, and multigroup SEM were performed on the collected data using SPSS Statistics and AMOS. Based on escaping-seeking theory, tourist intentions were divided into escaping and seeking motivations, and tourist shopping values were divided into functional, emotional, and social. The shopping items were divided into materials and experiential goods to understand the difference between the types preferred by tourists according to the perceived value. In addition, differences in tourist shopping behaviors according to the three nationalities were identified. The findings illustrate that the escaping motive affects emotional and social values, whereas the seeking motive affects all three. Moreover, it was confirmed that functional and emotional values affect preference for material and experiential goods, but social value only affects preference for material goods. For the cross-cultural study, differences in tourist shopping behavior according to nationality were identified.

KCI등재

8패션제품 구매결정에 영향을 미치는 피팅룸 환경 요인에 관한 연구

저자 : 박현희 ( Hyun-hee Park ) , 이은경 ( Eun-kyoung Lee ) , 전중옥 ( Jung-ok Jeon )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 24권 6호 발행 연도 : 2022 페이지 : pp. 756-765 (10 pages)

다운로드

(기관인증 필요)

초록보기

The purchase-related responses of MZ generation consumers may vary depending on the environmental factors of the fitting room. Therefore, this study extracted and systematized fitting room characteristics in the retail fashion environment. In-depth interviews were conducted with a total of 50 informants to collect data on the experience of using the fitting room. Then, a qualitative analysis was performed. First, results confirmed that the environmental factors of the fitting room include physical (spatiality, functionality, comfort, and convenience) and human (interactivity and congestion) aspects. Next, additional analysis was performed on functionality and interactivity to clarify the influence of environmental characteristics of the fitting room. These factors were classified into qualitative categories. The study results confirmed that, in the case of functionality, preferred lighting and mirror factors vary depending on the clothing product type, the place and situation for wearing, and individual characteristics. Furthermore, regarding interactivity, the preference for the presence of sales staff or companions differed according to personal traits and the need for additional information and evaluation. The study provides valuable information for effective fitting room space planning for offline fashion stores to meet the needs of MZ generation consumers.

KCI등재

9시판 스포츠 브래지어의 디자인 차이에 따른 착용감 연구 - 어깨끈 차이를 중심으로 -

저자 : 한현숙 ( Hyunsook Han )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 24권 6호 발행 연도 : 2022 페이지 : pp. 766-774 (9 pages)

다운로드

(기관인증 필요)

초록보기

In this study, the fit of commercial sports bras was analyzed according to various design variations, focusing on the shape of the shoulder strap, which is known to cause great discomfort in wearing sports bras. Experimental clothes were set to four commercially available sports bras with different shoulder strap shapes. The results showed that, in “size suitability,” the overall satisfaction with experimental clothing B, of which the shoulder strap can be adjusted, was the highest, especially for “underbust circ. fit,” “bust circ. Fit,” and “shoulder strap length.” In the “Shape suitability” and “Wearability” sections, experimental clothing B also showed the highest satisfaction and the shoulder strap adjustment device did not negatively affect wearing satisfaction. In the question on “side wings rolled up,” experimental clothing A also received a relatively good score, which is due to its long front length. In the “Compression of the front center” section, the responses for experimental clothing A and B were “appropriate” and for C and D, they were “pressurized.” In “motion suitability” as well, satisfaction with experimental clothing B was the highest, followed by experimental clothes A, C, and D. In the “body shape correction” section, clothing B elicited the highest satisfaction, followed by experimental clothes A, C, and D, in that order. Overall, it is recommended that shoulder straps be applied with adjustable straps for the comfort of the shoulder area while wearing sports bras.

KCI등재

10Nicotinoyl Dipeptide-23를 함유한 퍼머넌트 환원제에 Polyquaternium-10 첨가에 따른 웨이브 효과 (2)

저자 : 장미화 ( Mi-hwa Chang )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 24권 6호 발행 연도 : 2022 페이지 : pp. 775-781 (7 pages)

다운로드

(기관인증 필요)

초록보기

As part of research to develop a permanent wave-reducing agent for hair, in the current study, 0.1%-1.0% of‌ᅠPolyquaternium-10 was added to a permanent reagent containing Nicotinoyl Dipeptide-23 to prepare the agent, which was tested on damaged hair. The pH change was relatively stable even after a date, but due to the hair's natural composition, 0.1%-0.6% of the Polyquaternium-10 concentration according to pH was suitable. The temperature safety experiment demonstrated it to be stable at a high temperature and at room temperature, but when a Polyquaternium-10 concentration of 0.9% or higher was added at 0°C, coagulation occurred. In terms of the force efficiency of permanent wave formation, wave efficiency lowered as the concentration increased: the longer the wave lasts, the lower the Polyquaternium-10 concentration. The permanent moisture content was found to be higher as the concentration of Polyquaternium-10 increased. Therefore, when Polyquaternium-10 is applied to the permanent wave-reducing agent, considering stability, permanent formation, durability, and moisture rate, the most suitable concentration was found to be that of Polyquaternium-10 in the cysteine- reducing agent. A novel finding from this study is that as the concentration of Polyquaternium-10 increases, the consistency of the permanent wave-reducing agent changes, shifting from a liquid to a viscous liquid formulation.

12
권호별 보기
같은 권호 다른 논문
| | | | 다운로드

KCI등재

1패션 브랜드의 웹사이트 활용 실태 분석

저자 : 권현주 ( Hyun Ju Kwon ) , 구양숙 ( Yang Suk Ku )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 7권 1호 발행 연도 : 2005 페이지 : pp. 1-9 (9 pages)

다운로드

(기관인증 필요)

초록보기

The purpose of this study was to analyze the utilization of Fashion Brands Web-site. This analysis was done by 6C Concept(Contents, Community Commerce, Connection, Customizing, Communication) which was Internet Marketing Strategy. The review of previous studies and empirical investigations through the Internet were processed for this study 151 fashion brands in deixwtment stores, Daegu, Korea were surveyed from January to February 2004. Data were analyzed by using frequency and percentage. Total 105 brands established their Web-Site of Internet out of 151(69.5%) fashion brands. There were four characters on Contents, six characters on Connection and five characters on Communication. And there were a establishing rate of 38.1 percent on Online Community and 3(15 percent on Online Shop-ping Mall. On Customizing, 73.3 percent of brands had e-CRM systems.

KCI등재

2사회적 지원이 섬유산업 종사자의 직무스트레스 징후 및 직무성과에 미치는 영향

저자 : 유화숙 ( Hwa Sook Yoo ) , 박광희 ( Kwang Hee Park )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 7권 1호 발행 연도 : 2005 페이지 : pp. 1-8 (8 pages)

다운로드

(기관인증 필요)

초록보기

The pm-pose of this study was to investigate social support buffering stress symptoms and the relationship between stress symptoms and job performance. The data were obtained from questionnaires completed by 529 workers employed in textile or clothing companies. The SPSS package was used for data analysis which included t-test, ANOVA, and correlation analysis. The results showed there were significant differences in the perceived levels of social support according to individual differences such as gender, marital status, length of service, title of current position, and division of responsibility. Workers with a high level of supervisor or co-worker social support were found to have the lower levels of stress symptoms. Social support appeared to moderate the relationship between stress symptoms and job performance.

KCI등재

3대전 대덕구 출토 복식 유물에 부착된 세균의 종류 및 섬유소분해효소 활성

저자 : 이상준 ( Sang Joon Lee ) , 차미선 ( Mi Sun Cha ) , 조현혹 ( Hyun Hok Cho ) , 백영미 ( Young Mee Back ) , 권영숙 ( Young Suk Kwon )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 7권 1호 발행 연도 : 2005 페이지 : pp. 1-5 (5 pages)

다운로드

(기관인증 필요)

초록보기

This study was aimed to isolation and identification of attached bacteria on the clothes excavated from Deajeon area dating on the 16th century. From the observation with colony shape, 17 bacterial strains were isolated, and then 7 bacterial strains were identified with morphological and biochemical characteristics. Streptococcus sp., Alcah eves faecalis, Gemella sp., Acinetobacter sp., Pseudomones vesicularis, Aeromonas sails. salmonicida, Moraxella spp. In observation of the bacterial strains by the sort of textile, more bacterial strains were found in silk, cotton, and cotton bats than in ramie and hemp. It is suggest that hemp has antibacterial characteristics due to the presence of lignin. In the comparison washed samples with unwashed ones, there were more kinds of bacterial strains in washed samples. In the cellulase activity tests, all isolated bacteria had low level cellulase activity.

KCI등재

4프로젝타일과 에어제트 직기특성이 의류용 모직물 물성에 미치는 영향 (1) -장력특성과 직기 메커니즘-

저자 : 김승진 ( Seung Jin Kim ) , 정기진 ( Gee Jin Jung )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 7권 1호 발행 연도 : 2005 페이지 : pp. 1-5 (5 pages)

다운로드

(기관인증 필요)

초록보기

This study surveys the warp and weft tension differences between projectile and air jet looms and analyses the mechanical properties of worsted fabrics for garment with relation of these loom characteristics using KES-FB system. The paper is divided by two parts. In the 1st paper, the worsted fabric is woven as 5 harness satin weave using 1/ 40 Nm sirofil worsted warp yarn and 1/30 Nm worsted weft yarn by projectile(Sulzer) and air jet looms(Picanol PAT and OMNI), respectively. The weavability is also analysed by measuring warp tension variation according to the warp position and weft tension of 3 kinds of looms. The relationship between shed amount and the warp tension is surveyed, and the relationship between end breaks and warp and weft tensions is also discussed.

KCI등재

5스포츠 웨어의 슬릿 벤틸레이션 시스템이 인체 생리반응에 미치는 효과

저자 : 연수민 ( Soo Min Yeon ) , 김희은 ( Hee Eun Kim )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 7권 1호 발행 연도 : 2005 페이지 : pp. 1-6 (6 pages)

다운로드

(기관인증 필요)

초록보기

The purpose of this study was to investigate the effects of silt ventilation system on physiological responses. We measured rectal temperature, local skin temperature, clothing microclimate, blood pressure, heart rate, energy metabolism, body weight loss and subjective sensation during 70 minute, 50 nun exercise period and 20 min rest period. The five women subjects randomly wore sportswear without slit ventilation system(NS sportswear) and sportswear with slit ventilation system(S sportswear) under environmental condition of 25°C, 50%RH. The results of this study are as follows; Rectal temperature, mean skin temperature, clothing microclimatc, blood pressure, heart rate, energy metabolism and body weight loss were significantly lower level in `S sportswear`. In `S sportswear`, subjects replied less hot, less uncomfortable and less wet. Slit ventilation system can he used for bellow effect which is meaningful device of convection during exercise. We could find out that `S sportswear` has advantage in physiological function.

KCI등재

6기본스커트의 허리선 위치와 라운드 벨트 폭의 변화에 따른 시각적 효과

저자 : 이정순 ( Jung Soon Lee )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 7권 1호 발행 연도 : 2005 페이지 : pp. 1-7 (7 pages)

다운로드

(기관인증 필요)

초록보기

The purpose of this study is to evaluate the differences of visual effects by variations in the location of the waistline and the width of the round belt of the basic skirt. The stimuli are 21 samples: 7 variations of the location of the waistline and 3 variations of the width of the belt. The data has been obtained from 43 fashion design majors. The dat has analyzed by frequency, factor analysis, anova, scheffe`s test and the MCA method. The results of this study are as fol lows. The visual effects by variations of the location of the waistline and the width of the belt arc composed of 3 factors the shape of the front part of the abdomen, the shape of the side part of the abdomen, and the length of the upper both The visual effects by variations of the width of the belt have partial signifiu~int differences. The visual effects by variation: in the location of the waistline have significant differences in all factors. The interaction effects between the location o the waistline and the width of the belt have not significant differences in all factors.

KCI등재

7CAD를 활용한 자카드 텍스타일 디자인 개발 프로세싱 연구 -넥타이 디자인을 중심으로-

저자 : 송경자 ( Gyeong Ja Song ) , 진영길 ( Young Gil Chin )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 7권 1호 발행 연도 : 2005 페이지 : pp. 1-9 (9 pages)

다운로드

(기관인증 필요)

초록보기

This study attempts to address the development processing of yarn-dyeing jacquard design by using jacquard textile design professional CAD system to create high valued worth products. To carry out this purpose, two kinds of necktie samples were designed and each of them was different in three types of weaving method. The results arc as follows; All over typo is appropriate when the motive`s size is small. And the work can be finished within short time and design can he illustrated by basic jacquard system. However, one point type can represent rather big and audacious motive but it needs lots of working hours and jacquard system. Though the motives are identical, showed many changes in cubicle representation according to weaving methods and the structure. To express simple and modest design, single fabric woven is suitable and in the need of colorful and technical design, expressing by double weft cloths and triple weft cloths rather than single firbric woven are better to give creativity and colorfulness. For the production of jacquard design, cad system using ability is important but the understanding and study of the whole process of weaving development should he made.

KCI등재

8프로젝타일과 에어제트 직기특성이 의류용 모직물 물성에 미치는 영향(2) -의류용 모직물 물성변화-

저자 : 김승진 ( Seung Jin Kim ) , 정기진 ( Gee Jin Jung )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 7권 1호 발행 연도 : 2005 페이지 : pp. 1-5 (5 pages)

다운로드

(기관인증 필요)

초록보기

This research surveys the mechanical properties of worsted fabrics for garment according to the loom characteristics and fabric positions with relation to the warp and weft weaving tensions on the projectile and air jet looms, which is previously surveyed in the 1st paper. For this purpose, the grey fabrics are processed in dyeing and finishing processes. The mechanical properties of the finished fabrics are measured and discussed with relation to the warp and weft weaving tensions of projectile and air-jet looms and the variations of the fabric mechanical properties according to the fabric positions are also surveyed for investigating the homogeneity of the tailorahility and fabric hand.

KCI등재

9아세테이트 직물의 NaOH 처리시 무기염 첨가에 따른 영향

저자 : 성종미 ( Jong Mi Sung ) , 김혜림 ( Hye Rim Kim ) , 송화순 ( Wha Soon Song )

발행기관 : 한국의류산업학회 간행물 : 한국의류산업학회지 7권 1호 발행 연도 : 2005 페이지 : pp. 1-6 (6 pages)

다운로드

(기관인증 필요)

초록보기

The effect of sodium acetate to reduce the fiber damage and hardening of acetate fabrics during alkaline treatment is studied. The optimal condition is controlled concentration 2%, at 50°C for 6 minutes and at 70°C for 2 minutes through the result of weight loss, shrinkage and tensile strength. Alkaline treated acetate fabrics under optimal condition show softer than untreated acetate fabrics. Alkaline treatment with sodium acetate brings the reduction in hardening and shrinkage in internal fiber of acetate fabric. Also, alkaline treatment with sodium acetate improves the tensile strength of acetate fabrics compared with only alkaline treatment. The moisture regain of acetate fabrics is also improved by alkaline treatment under optimal condition.

1
발행기관 최신논문
자료제공: 네이버학술정보
발행기관 최신논문
자료제공: 네이버학술정보

내가 찾은 최근 검색어

최근 열람 자료

맞춤 논문

보관함

내 보관함
공유한 보관함

1:1문의

닫기