The purpose of this study is to provide a basis for establishing regional harvesting systems that ist the prerequisites for the forest mechanization. The factors restricting to the forest harvesting and logging methods from topographical aspects are studied for this purpose. Three main harvesting methods studied in this paper are : shortwood method, longwood method and full tree method. This study shows : the shortwood method is suitable for low, the longwood method for medium, the full tree method for high topographical conditions. For the logging methods, the focus of the study is on various ground based logging systems by anmalpower, manpower, gravitation, wheeled & crawler vehicle and cable. The factors limiting the coverage of logging operation are slope and logging distance. The cable crane logging methods are classified by logging distance into short distance(to 300 or 400m), middle distance(to 700 or 800m) and long distance cable crane methods (over 700 or 800m). The wheeled vehicle method shows serious damages to forest resources, whereas the logging by log-line of the gravitation logging method and cable crane method tend to minimize such damages. The wheeled & crawler vehicle method also shows difficult to apply in the high slope conditions, whereas cable crane method can be applied to maximum 120% steep slope and uphill conditions.