The TiAl alloy is attracting attention as a lightweight and heat-resistant material, because of its high specific strength, excellent high-temperature formability, and fatigue strength. However, its applications are limited by its high unit price and low room temperature ductility. To overcome this issue, dissimilarly bonded materials have been extensively employed. This involves joining a brittle metal to a low-cost metal that possesses excellent plasticity, using various dissimilar bonding techniques. In this study, TiAl/HI-TEMP 820/SCM440H materials were fabricated using a vacuum brazing process under different temperature conditions. After the brazing process, the microstructure of the interfacial area revealed seven distinct layers resulting from chemical reactions between the base metals and the filler metal. These reaction layers consisted of a Ni solid solution, intermetallic compounds (Ti₃Al, TiNi₂Al, Ti₂Ni, FeNi), and borides (CrB, TiB₂, FeB). To analyze the effect of brazing temperature on the relationship between the microstructure and mechanical properties at the interface of TiAl/HI-TEMP 820/SCM440H materials, conventional uniaxial tests and nanoindentation tests were performed. The measured nanohardness exhibited a significantly large distribution for each reaction layer, with the highest hardness values observed in the intermetallic compounds and borides layers. Additionally, room temperature tensile tests confirmed that fractures initiated in the highhardness and brittle intermetallic compounds and borides layers. (Received 3 November, 2023; Accepted 20 December, 2023)