골재자원조사를 통해 수집된 84개 시 · 군의 품질시험을 바탕으로 하천/육상/산림 골재의 물리적 특성값을 분석하였다. 하천/육상골재는 18개 시험 항목과 산림 골재는 12개 시험 항목에 대해 각각 유역과 지질에 따라 분류하였다. 물리적 특성으로 유역별 하천골재는 금강 유역이 2.5 mm, 1.2 mm, 0.6 mm, 0.3 mm, 0.15 mm, 0.08체 통과량과 낙동강유역은 점토덩어리와, 섬진강유역은 10 mm, 5 mm, 2.5 mm, 1.2 mm, 0.6 mm, 0.3 mm, 0.15 mm, 0.08체 통과량, 안정성과, 영산강유역은 10 mm, 5 mm, 2.5 mm, 1.2 mm, 0.6 mm, 0.3 mm, 0.08체 통과량과, 한강유역은 10 mm, 0.6 mm, 0.08체 통과량, 실적율이 평균의 표준오차가 다른 물리적 특성과는 다른 분포 양상을 보이는 것으로 분석됐다. 분산분석은 18개 항목 중 흡수율과 실적율을 제외한 16개 항목이 권역별로 평균에 통계적으로 유의한 차이가 있는 것으로 분석됐다. 또한, 유역별 육상골재는 금강유역을 제외한 낙동강유역이 점토덩어리와, 섬진강유역은 10 mm, 5 mm과, 영산강유역은 0.08체 통과량과, 한강유역은 10 mm, 0.6 mm, 0.08체 통과량이 평균의 표준오차가 다른 물리적 특성과는 다른 분포 양상을 보이는 것으로 분석됐다. 분산분석은 18개 항목 모두 권역별로 평균에 통계적으로 유의한 차이가 있는 것으로 분석됐다. 그리고, 지질별 산림골재는 화성암을 제외한 변성암이 공극률과, 퇴적암은 마모율과 공극률이 다른 물리적 특성과는 다른 분포 양상을 보이는 것으로 분석됐다. 분산분석은 표면건조밀도와 절대건조밀도, 진밀도, 단위용적질량, 흡수율, 마모율, 실리카중합비(Sc/Rc) 항목이 지질별로 평균에 통계적으로 유의한 차이가 있는 것으로 분석됐다.

Aggregates from 84 cities and counties in Korea were tested for quality to allow analysis of the physical characteristics of aggregates from river, land, and forest environments. River and land aggregates were analyzed for 18 test items, and forest aggregates for 12 test items. They were classified according to watershed and geology, respectively. The observed physical characteristics of the river aggregates by basin were as follows: aggregates from the Geum River basin passed through 2.5, 1.2, 0.6, 0.3, 0.15, and 0.08 mm sieves; clay lumps constituted the Nakdong River basin material; aggregates from the Seomjin River basin passed through 10, 5, and 2.5 mm sieves; those from the Youngsang River basin passed through 1.2, 0.6, 0.3, 0.15, and 0.08 mm sieves; and aggregates from the Han River basin passed through 10, 5, 2.5, 1.2, 0.6, 0.3, and 0.08 mm sieves, Stability; Standard errors were analyzed for the average amount passing through 10, 0.6, and 0.08 mm silver sieves, and performance rate showed different distribution patterns from other physical characteristics. Analysis of variance found that 16 of the 18 items, excluding the absorption rate and the performance rate, had statistically significant differences in their averages by region. Considering land aggregates by basin, those from the Nakdong River basin excluding the Geum River basin had clay lumps, those from the Seomjin River basin had 10 and 5 mm sieve passage, aggregates from the Youngsang River basin had 0.08 mm sieve passage, and those from the Han River basin had 10, 0.6, and 0.08 mm sieve passage. The standard error of the mean of the quantity showed a different distribution pattern from the other physical characteristics. Analysis of variance found a statistically significant difference in the average of all 18 items by region. Analyzing forest aggregates by geology showed distributions of porosity patterns different from those of other physical characteristics in metamorphic rocks (but not igneous rocks), and distributions of wear rate and porosity were different from those of sedimentary rocks. There were statistically significant differences in the average volume mass, water absorption rate, wear rate, and Sc/Rc items by lipid.