닫기
18.97.9.173
18.97.9.173
close menu
폴리모 모르터를 이용(利用)한 강화목재(强化木材)보의 개발(開發)
Development of Reinforced Wood Beams Using Polymer Mortar
연규석 ( Yeon Kyu Seok )
UCI I410-ECN-0102-2018-500-003769966

Based on limited number of tests on reinforced wood beams using polymer mortar in this study, following conclusions were drawn; 1. Reinforcing compression side of wood beam using polymer mortar was effective in reducing deflection. 2. By increasing thickness of polymer mortar, effective beam stiffness was improved, but energy absorption was reduced. 3. Polymer mortar reinforcement improved compressive strength and reduced strain in compression side of the beam. Therefore, it was possible to change the failure mode from by compression in control beam to by tension in composite beams. 4. The composite beams that have more than 2cm of polymer mortar layer did not perform well because a strain redistribution and separation of meterials at interface were induced in moment span. 5. To maximize the load carrying capacity of composite beam, it is necessary to make polymer mortar and wood behave together without failing at interface. To do this, it is needed to use a polymer mortar which has high strength with such elastic modulus that is closer to elastic modulus of wood. Otherwise, it is recommended to use shear connectors at interface to prevent separation of materials under ultimate load.

[자료제공 : 네이버학술정보]
×