닫기
18.97.9.172
18.97.9.172
close menu
Accredited SCOPUS
불소계 변성 폴리우레아의 합성 및 오존저항 특성
Synthesis and Ozone Resistance Characteristic of Fluorine-containing modified Polyurea
김성래 ( Sung Rae Kim ) , 박지용 ( Ji Yong Park ) , 이종대 ( Jong Dae Lee )
화학공학 vol. 54 iss. 2 175-180(6pages)
UCI I410-ECN-0102-2017-570-000087003

본 연구에서는 내 오존성을 향상시키기 위해 PFPE-diol을 도입하여 불소계 변성 폴리우레아를 합성하였다. 불소 함량에 따라 변성 폴리 우레아(PFDIA-10C, PFDIA-20C, PFDIA-30C)를 제조하였으며 각각의 폴리우레아는 불소를 10wt%~30wt% 포함하였다. 제조된 도막의 오존처리 전 후 질량변화를 조사하였고, 도막의 경도, 내마모성, 인장성능 그리고 신장율 등의 물성을 분석하였다. 또한 내 오존성 테스트(10ppm, 336h)후에 광학현미경을 통해 도막표면을 관찰한 결과 PFPE-diol의 함량이 20wt% 이상 일 때 균열, 탈색 그리고 질량감소량에서 양호한 결과를 보여주어 도막의 내 오존성이 향상되었음을 알 수 있었다. FT-IR 분석을 통해 PFDIA 합성물의 O-H 피크가 불소 함량 증가함에 따라 감소하는 것을 확인하였다.

The fluorine-containing modified polyurea was synthesized using the PTPE-diol to improve the ozoneresistance. Three types (PFDIA-10C, PFDIA-20C, PFDIA-30C) of the modified polyurea containing the fluorine content from 10wt% to 30wt% were prepared. After ozone treatment on the prepared films, the weight loss of film was investigated and analyzed the film properties such as hardness, wear resistance, tensile stress, elongation, etc. Also, the film surfaces were observed by the optical microscopy after ozone-resistance tests at 10ppm for 336h. It was shown that the defects such as the cracking, the bleaching and the mass loss were reduced and the ozone-resistance of films were improved when the contents of PFPE-diol are more than 20wt%. It was found that the intensity of O-H peak in PFDIA compounds confirmed by FT-IR was decreased as fluorine contents were increasing.

1. 서 론
2. 실 험
3. 결과 및 고찰
4. 결 론
감 사
References
[자료제공 : 네이버학술정보]
×