We investigated the etching characteristics of titanium nitride (TiN) thin film in BCl3/Ar inductively coupled plasma. The etching parameters were the gas mixing ratio, radio frequency (RF) power, direct current (DC)-bias voltages and process pressures. The standard conditions were as follows: total flow rate = 20 sccm, RF power = 500 W, DCbias voltage = -100 V, substrate temperature = 40℃, and process pressure = 15 mTorr. The maximum etch rate of TiN thin film and the selectivity of TiN to Al2O3 thin film were 54 nm/min and 0.79. The results of X-ray photoelectron spectroscopy showed no accumulation of etch byproducts from the etched surface of TiN thin film. The TiN film etch was dominated by the chemical etching with assistance by Ar sputtering in reactive ion etching mechanism, based on the experimental results.