Tactel(Nylon66) union fabrics were wovenwith the specification of 70d/34f nylon as warp for sport wear jacket. Weft yarn has three types; 100% cotton yarn, nylon core-spun yarn and nylon-polyurethane covering yarn as weft. Fabric strutters were plain, twill and satin weave structure with the air jet loom. The mechanical properties of 8 fabrics were measured with KES-F and primary Hand Values and Total Hand Values were calculated. The results of the study were as follows: 1) There was little difference among LTs of N/CM fabric groups. RT of the fabrics with CM100`s was bigger than that of fabrics with CM80`s , resulting that the fabrics with CM100`s havebetter formability. In terms of weavstructure, twill fabrics have shape deformation. 2) In comparison of RTs with weft yarn type, RT of N-PU covering yarn was the highest, followed by Nylon core-spun yarn and cotton yarn. Thus, the fabric with N-PU covering yarn has better stability of shape deformation. 3) Stretch yarn could express an excellent silhouette formation and twill and satin structures were better structure to make curvature on human form. 4) 2HG/G value of nylon core-spun fabrics was larger than that of NC fabrics, but the silhouette formation of N/C fabrics was excellent. 5) The RC of N/PU was the highest, followed by N/P, and N/CM . 6) Koshi of N/PU fabrics was the highest, Numeri of N/PU and N/Co-Ⅰ were relatively higher than the others. THVs of N/CM-Ⅳ and N/CO-Ⅱ were lower than the others, resulting that, twill structure was better than plain structure for a sport wear use