닫기
216.73.216.153
216.73.216.153
close menu
논문집 초록 : 학술발표일정 ; 3. 포스터발표 : 폐합성수지를 함유한 흡착제 제조 및 중금속 제거에 관한 연구
A Study on Adsorbent Preparation using Waste Synthetic Resin and Removal of Heavy Metal
김명호 , 이정전
UCI I410-ECN-0102-2009-530-003254752
이 자료는 4페이지 이하의 자료입니다.
* 발행 기관의 요청으로 이용이 불가한 자료입니다.

인간의 생활 및 산업활동으로 발생되는 재이용 가능한 폐기물을 유용하게 재활용하기 위해 본 연구를 실시하였으며 중금속 흡착제에 사용된 재료는 농촌에서 다량으로 발생되는 폐비닐과 도시 생활에서 대량으로 발생되는 폐프라스틱 등의 폐합성수지와 산업체 등에서 발생되는 부재료로 굴껍질, 제철분진, Coal fly ash, Mg 중에서 한가지 이상을 선택하여 Compounding한 다음 발포제를 첨가하여 용융·압출하여 중금속 흡착제를 제조하였다. 이는 다공질체로써 표면적이 불규칙하여 비표면적이 크고 중금속에 대한 흡착제거율이 뛰어나, 이를 산업체 도금폐수에 적용시켜 도금폐수중의 중금속을 효율적으로 제거하기 위한 연구를 실시하였다. 폐합성수지를 함유한 중금속 흡착제 제조방법은 폐합성수지 10∼66Wt.%와 부재료 90∼34Wt.%을 혼합하여 100Wt./100%에 대한 발포제 0.5∼5.0Wt.%를 첨가한 후 혼합하여 발포시키는 단계와 전 단계에서 발포된 폐합성수지와 부재료의 혼합물을 용융 압출시켜 CSPs(Compound Stony pellets)의 중금속 흡착제를 제조하여 총 6개의 흡착제를 가지고 실험을 실시하였으며 중금속 제거율 실험은 회분식 반응기를 이용하여 실험을 실시하였다. 그 결과 첫째, Zn, Cu에 가장 양호한 제거율을 나타낸 것은 CSPs-1이며 CSPs-4가 CN-에 가장 양호한 제거율을 나타내었다. 둘째, 제조된 흡착제의 중금속 제거율을 분석하기 위하여 시화공업단지내의 도금공장 폐수에 적용한 결과 Zn, Cu, CN-의 제거율이 90%(시료채취 시간 4h), 68%(시료채취 시간 8h), 69.8%(시료채취 시간 2h)로 분석되었다. 이상의 결과에 의하면 폐합성수지에 부재료의 소각제, 폐굴껍질, 제철분진, Mg을 각각 다른 비율로 첨가하여 제조한 흡착제는 중금속을 함유한 폐수의 정화 효과가 있는 것으로 나타났으며 폐자원을 이용한 흡착제라는 점에서 상당한 의의가 있다고 사료된다.

The achievement of this study is high removal efficiency of a heavy metal in industrial coating wastewater using an Adsorbent which is irregular surface area and large surface area. The Preparation method of the Adsorbent is as follows; At first, waste vinyl produced from a vinyl hot house of rural to reuse waste material, compound plastics produced many amount in urban communities and more than one of the oyster shells, iron making dust, coal fly ash and Mg producing industrial belongs are compounded. Secondly, foaming agent is added and then melting and pressing are conducted. The CSPs(Compound Stony Pellets) Adsorbent containing waste compound plastics is made of waste compound plastics(10∼66Wt.%), industrial belongs(90∼34Wt.%) and foaming agent(0.5∼5.0Wt.%). This experinment is conducted by a batch reactor and six Adsorbent to remove heavy metal. The removal efficiencies for Zn, Cu, and CN- were 90%, 68% and 72% at wastewater of a coating factory in an Shi-Wha industrial complex. From this study, it is possible to obtain double effects, i,e, reuse of wastewater and contaminants reduce.

[자료제공 : 네이버학술정보]
×