생산원가의 절감을 위해서 육티탄산칼륨 섬유는 융제법으로 원료물질을 금홍석, 공업용 K₂CO₃, 그리고 공업용 K₂MoO₄를 사용하여 제조하였다. 이 육티탄산칼륨 섬유를 얻기 위한 최적 조건은 반응온도 1050℃, 반응시간 5hrs, K₂CO₃에 대한 금홍석의 몰비 5.5 그리고 K₂CO₃와 TiO₂ 혼합물에 대한 flux의 몰비 4.0이었으며, 적절한 해섬처리 조건은 40배수의 물에 대해 8시간이었다. 이상의 조건으로 합성한 육티탄산칼륨 섬유는 평균 직경 0.5㎛, 평균길이 17㎛였다. 또한 육티탄산칼륨 섬유는 1N HCl에서 60일 후에도 안정하였다.
Fibrous potassium hexatitanate whisker was produced through the flux method using a mixture of the natural ruble ore, industrial K₂CO₃ and industrial K₂MoO₄ in an attempt to reduce the fabrication cost. The optimum condition for the synthesis of potassium hexatitanate whisker was the reaction temperature of 1050℃, reaction time of 5 hrs, ruble ore mole ratio to K₂CO₃ of 5.5, and flux mole ratio to mixture (K₂O+nTiO₂) of 4.0. Also the proper water leaching condition for removing of K component was a multiful of 40 for water quantity and 8 hrs for leaching time in boiling water. In this condition, synthisized potassium hexatitanate whisker was a fibrous crystal of 17㎛ of average length and 0.5㎛ of average diameter. Potassium hexatitanate whisker was stabilized after 60 days at 1N HCl.