닫기
18.97.9.168
18.97.9.168
close menu
SCOPUS
회중석 정광의 염소화에 의한 텅스텐 성분의 추출
Extraction of tungsten component from the scheelite concentrate by the chlorination
엄명헌 , 이철태 ( Myeong Heon Um , Chul Tae Lee )
공업화학 vol. 4 iss. 1 82-93(12pages)
UCI I410-ECN-0102-2009-570-007312339

염소화 공정을 통해 batch-boat system에서 회중석으로부터 텅스텐 성분을 추출하기 위해, 환원제인 탄소의 무게비, 반응온도, 반응시간, Cl_2 gas의 유량 그리고 시료입도와 같은 주요 반응 변수들에 대한 영향을 조사하였다. 이 염소화 공정들에 대한 적정조건들은 반응온도 700℃ 이상, 광물시료에 대한 탄소의 무게비 0.08, 반응시간 20분, Cl_2 gas의 유량 0.6ℓ/min, 광물시료의 입도 -200mesh였으며 위 조건하에서 광물중 99%의 tungsten성분이 추출되었다. 반응속도는 고온에서는 Cl_2 gas의 확산단계가, 저온에서는 화학반응단계가 속도결정단계로 보이며 각각의 단계에서 활성화 에너지는 고온 부분에서는 7.98㎉/㏖이며 저온 부분에서는 31.2㎉/㏖이었다.

To extract the tungsten component from the scheelite by the chlorination process, effects of major variables such as the reducing agent, reaction temperature, reaction time, flow rate of the Cl_2 gas, and the particle size of the sample, were examined in the batch-boat system. The optimum conditions for this chlorination process were as follows ; reaction temperature above 700℃, carbon weight ratio to the scheelite 0.08, reaction time 20 min, flow rate of the Cl_2 gas 0.6ℓ/min, particle size of scheelite ore -200 mesh. Under the above conditions, 99% of tungsten component was extracted from scheelite ore. The diffusion step and chemical reaction step were the rate-determining steps at high and low temperature, respectively. Activation energy was 7.98㎉/㏖ at high temperature region and 31.2㎉/㏖ at low temperature one.

[자료제공 : 네이버학술정보]
×