모의사용후핵연료로부터 sodium bisulfite 수층에 회수된 요오드(I^-)를 이온크로마토그래피법을 이용해 정량할 때, 0.1 M sodium bisulfite와 1 mM 질산의 영향 없이 미량 요오드(1 ppm)를 정량하기 위한 방법을 검토하였다. AS4A-SC(DIONEX) 컬럼과 자외선검출기를 사용하였고 sodium bisulfite. 질산 및 요오드의 자외선 흡광도를 측정하여 요오드 정량에 적합한 흡수파장으로 230 nm를 선택하였고 용리액 농도는 0.1 M NaCl이 효율적이었다. 이 조건에서 0-1,000 ppb범위의 검정곡선을 작성하였다. 이때 선형상관계수는 0.99993 이었으며 검출한계는 5 ppb였다. 상대표준편차는 1.26% 이었다.

The iodide was recovered from a simulated spent fuel to the sodium bisulfite aqueous solution. It was discussed that the trace iodide (below 1 ppm) was determined without the matrix effect of 0.1 M sodium bisulfite and 1 mM HNO₃ in aqueous solution by ion chromatography with UV detection. AS4A-SC(DIONEX) column and UV-absorption spectrophotometer were used. The UV-absorption spectra of sodium bisulfite, nitric acid and iodide were obtained, and then 230 nm was selected as an absorption wavelength for iodide determination. 0.1 M NaCl eluent was optimum condition. In this condition the calibration curve of iodide was obtained on the range of about 0-1,000 ppb. The linear coefficient was 0.99993 and the detection limit was 5 ppb. The relative standard deviation was 1.26%.