A Preliminary Investigation on the Bending Rigidity of the Longitudinal Stiffeners in Curved Plate Girders Stiffened with Single Stiffener
1. 서 론 2. 기존 연구 및 국내외 설계기준 3. 설계기준의 필요 휨강성 비교 4. 비선형해석에 의한 필요 휨강성 평가 5. 보강재 필요 휨강성의 예비 제안 6. 결 론 감사의 글 참고문헌(References)
본 연구에서는 강재 곡선거더에서 수평보강재로 웨브 1단 보강 시 보강재 필요 휨강성을 평가하였다. 곡선거더는 곡률로 인해 휨 거동이 직선거더와는 다르므로 대부분의 교량설계기준에서는 수평보강재가 곡률중심 쪽(내측) 또는 반대쪽(외측)에 설치되는 경우를 구분하여 보강재의 필요 휨강성을 제시하고 있다. 직선거더 대비 곡선거더에서 보강재 필요 휨강성은 재료 및 기하비선형해석으로부터 평가하였다. 항복강도 355 MPa 강재거더에 대해 웨브 패널의 형상비, 곡률반경, 보강재의 위치(내측 또는 외측)를 매개변수로 고려하였으며, 곡선거더에서 보강재의 필요 휨강성은 직선거더와 동등한 수준의 휨강도가 얻어질 때로 설정하였다. 해석결과에 근거하여 AASHTO LRFD 교량 설계기준 대비 수평보강재의 휨강성에 대해 수정된 식을 잠정적으로 제안하였다.
The bending rigidity required of longitudinal stiffeners in curved steel girders stiffened with single stiffener was investigated. Bending behaviour of curved girder is different with that of straight girder due to curvature. Therefore, most bridge design specifications stipulate the required bending rigidity of the stiffeners for the cases where the stiffener is on the side of the web toward(inside) or away(outside) from the center of curvature, separately. The required bending rigidity in curved girders versus straight girders was evaluated through material and geometric nonlinear analysis. Yield strength of 355 MPa steel was considered and aspect ratio of web panel, radius of curvature, and location of stiffeners(inside or outside) were included as major parameters. The bending rigidity of the stiffeners required in the curved girder was assumed when the same level of flexural strength in straight girder is obtained. Based on the numerical results, a modified equation for the bending rigidity of the longitudinal stiffeners against AASHTO LRFD bridge design specifications was tentatively proposed.
한국학술정보㈜의 모든 학술 자료는 각 학회 및 기관과 저작권 계약을 통해 제공하고 있습니다.
이에 본 자료를 상업적 이용, 무단 배포 등 불법적으로 이용할 시에는 저작권법 및 관계법령에 따른 책임을 질 수 있습니다.
간행물명 | 수록권호 |
---|---|
|
23권 4호 ~ 23권 4호 |
|
34권 6호 ~ 34권 6호 |
대한상하수도학회·한국물환경학회 공동학술발표회 발표논문 |
2020권 0호 ~ 2020권 0호 |
|
48권 6호 ~ 48권 6호 |
|
34권 5호 ~ 34권 5호 |
|
48권 5호 ~ 48권 5호 |
한국목재공학 학술발표논문집(Conference Proceedings) |
2019권 2호 ~ 2020권 1호 |
|
23권 3호 ~ 23권 3호 |
|
34권 4호 ~ 34권 4호 |
|
48권 4호 ~ 48권 4호 |
|
34권 3호 ~ 34권 3호 |
|
23권 2호 ~ 23권 2호 |
|
48권 3호 ~ 48권 3호 |
|
34권 2호 ~ 34권 2호 |
지반(한국지반공학회지) |
36권 2호 ~ 36권 2호 |
|
36권 3호 ~ 36권 3호 |
|
48권 2호 ~ 48권 2호 |
|
23권 1호 ~ 23권 1호 |
|
36권 2호 ~ 36권 2호 |
|
34권 1호 ~ 34권 1호 |
자료제공: 네이버학술정보 |
---|
자료제공: 네이버학술정보 |
---|
본 자료는 원문파일이 존재하지 않거나 서비스를 위한 준비 중입니다.
빠른 시일 내에 서비스할 수 있도록 노력하겠습니다.
관련문의사항은 kiss@kstudy.com 으로 연락주시기 바랍니다.
감사합니다.
개인회원가입으로 더욱 편리하게 이용하세요.
아이디/비밀번호를 잊으셨나요?